Pins, pegs and eyelets for Half-drilled beads
Here you will find pin eyelets and short bail pins, which are particularly suitable for gluing on half drilled beads and similar, so that they can be used as pendants in earrings, bracelets, necklaces and the like. For mounting we recommend our jewellery glue Loctite Gel. Make sure that the length of the pin matches the hole diameter and depth of the bead, if necessary cut a little off the length of the pin. Place a small dab of glue on the tip of the pin and carefully screw the bead down over the pin, allow to dry for approximately 10 minutes.