Glue-in ends & snap lock clasps, golden

200pcs., crimp beads, platinum plated brass, diameter 4mm, length 3mm, inner hole size 3mm.

2 pcs. (1 set) 5 mm end caps/dups, for mounting silk cord necklaces, sterling silver, large and small eye,
End cap A: length 9.3 mm, inner eye diameter 3.5 mm, outer eye diameter 5 mm.
End cap B: length 8 mm, inner eye diameter 2 mm, outer eye diameter 3.7 mm,
make 2-3 knots close together at the end of the pearl necklace, push into the end cap with a drop of glue so that the knots cannot be pulled out of the hole once the glue has set. Attach the clasp to the open ring and close it in the large eye. 

10pcs. crimp beads, tube shape, gold-plated Sterling silver, length 1.5mm, diameter 2mm, hole size 1,2 mm.

Crimp beads, tubular wire crimps, gold plated brass, 100 pcs, diameter 2 mm, length 2 mm, hole diameter 1 mm. Especially suitable for use with Magical crimper plier.

1 piece, locking set for leather cords and similar, durable gold-plated steel. The end clamps are clamped around the ends of the cord with flat-nose pliers so that they overlap. Suitable for 3-4 mm cords.

6 pcs, wire clamp or stop bead with push-in pin, durable platinum-plated brass, width (without pin) 3.5 mm, length 2.5 mm, hole diameter 1 mm. Note The pin on the side is pressed into the bead with flat-nosed pliers to secure the wire.

6 pcs, wire clamp or stop bead with push-in pin, durable gold-plated brass, width (without pin) 3.5 mm, length 2.5 mm, hole diameter 1 mm. Note The pin on the side is pressed into the bead with flat-nosed pliers to secure the wire.

4 pcs, tube ends for seed bead bracelets, with clasp and extension chain, durable gold-plated stainless steel with 1 eye, length 16 mm, thickness 4 mm, inner tube diameter approx. 3 mm, inner eye size 1x2 mm

4 pcs, tube ends for seed bead bracelets, with clasp and extension chain, durable gold-plated stainless steel with 1 eye, length 6 mm, thickness 4 mm, inner tube diameter approx. 3 mm, inner eye size 1x2 mm, Suitable for 3 rows of Delica beads size #11.

4 pcs, tube ends for seed bead bracelets, with clasp and extension chain, durable gold-plated stainless steel with 1 eye, length 13 mm, thickness 4 mm, inner tube diameter approx. 3 mm, inner eye size 1x2 mm, Suitable for 8 rows of Delica beads size #11.

4 pcs, rounded clamp endings for ribbons and similar, width 13 mm, depth with eyelet 9 mm, suitable for ending woven bracelets. Clamp around the end of the ribbon, optionally with a dab of glue. Fits 12-14 mm wide tape

10 pcs, crimp cover, gold-plated stainless steel, durable coating, Crimp bead or knot cover, diameter 3 mm, Used to hide knots or wire clamps. Form a nice little ball when gently squeezed around a knot

200pcs., gilded brass crimp bead, diameter 4mm, length 2mm, inner hole size 3mm.

1 set., slide on Cord ends with clasp for weaved bead straps, gilded brass, length 13mm, thickness 4mm, inner tube diameter ca. 3,2mm, Fits 8 rows of Delica beads size #11

4 pcs, cord terminator without eye, with flat end, durable gold plated stainless steel, length 7 mm, outer diameter 6 mm, inner hole diameter 5 mm, depth 5,5 mm. The ends are typically glued to the string with super glue.

2pcs., gold plated sterlingsilver crimp end with eye, length (closed) 6mm., width 3mm., inner loop size 1,2mm. Makes an effective and simple closure of necklaces on string. Glue is recomended for mounting this end tip.

Set of approx. 240 terminations in 7 sizes for woven bracelets, earrings and similar woven with seed beads up to size #8 or small round beads up to 3mm, lengths from 10 to 40mm, diameter 4mm, width with eye 5.5mm, in the colours gold-plated and platinum-coloured brass, supplied in plastic box.

2pcs., crimp cord end, gold plated sterling silver, length 11mm, width 3mm. Suitable for 1,5-2mm cord.

1pc., chain closing with flat lobster claw clasp and cup end, gilded sterling silver, total length 30mm., outer crimp end diameter 7mm., inner cup end diameter 6mm.

1pc., chain closing with flat lobster claw clasp and cup end, gilded sterling silver, total length 30mm., outer crimp end diameter 6mm., inner cup end diameter 5mm.

Chain extender for mounting with clasp, Saturn chain, with 3 adjustment levels, total length 6 cm, jumpring diameter 4 mm, gold-plated sterling silver, 1 piece. With a chain extender, your bracelet or necklace can fit any size.

4pcs., slide on Cord ends for weaved bead straps, durable gilded steel, length 10mm, thickness 4mm, inner tube diameter ca. 3mm, inner eye measures 1x2mm. Fits 5 rows of Delica beads size #11

4pcs., slide on Cord ends for weaved bead straps, durable gilded steel, length 8mm, thickness 4mm, inner tube diameter ca. 3mm, inner eye measures 1x2mm. Fits 4 rows of Delica beads size #11

2pcs., rose gold plated silver cord end. Glue-in end: inner diameter 2mm, outer diameter approx. 2,5mm. Inner eye diameter 1,5mm, length 7,5mm. Fits 2mm leather cord e.g. Nb. the image does not match exactly the actual dimensions.

4pcs., sterling silver crimp end with eye, length (closed) 6,5mm, width 4mm, hole size 1mm, eye size 1.2mm. For an effective and simple closure of necklaces on string, no tools or glue are needed.

6pcs., gold plated brass cup for rhinestone chain 3mm, fold the two arms over the stone at the chain end to secure it. Diameter 3.5mm x 3.5 mm.

200pcs., gilded brass crimp bead, diameter 4mm, length 3mm, inner hole size 3mm.

2pcs., (1 set.) 4 mm crimp ends for fitting silk thread necklace etc., gilded sterling silver.
Cord end A: length 8mm, hole size 1,5mm, inner eye diameter 3,3mm.
ord end B: length 6,5mm, hole size 2mm, inner eye diameter 2mm.
Make 2-3 knots close together at the end of the necklace which are pushed into the bead with a dab of glue, so that the knots can not be pulled out once the glue has hardened. Place the clasp into the open ring and close in the large eye. See our guide for making necklaces with silk thread.

2pcs., crimp end with eye, gold plated sterlingsilver, length (closed) 6,5mm., width 2,5mm., hole size 1,5mm, eye size 2mm. Makes an effective and simple closure of necklaces on string. Glue is recomended for mounting this end tip.

1 set., slide on Cord ends with clasp for weaved bead straps, gilded brass, length 19mm, thickness 4mm, inner tube diameter ca. 3,2mm, Fits 11-12 rows of Delica beads size #11

Crimp bead set in silver, gold plated, black and copper, 125 pieces of each colour, Crimp bead, diameter 2 mm, length 2 mm, hole diameter 1 mm. Especially suitable for use with Magical crimper pliers.

1 set., slide on Cord ends with clasp for weaved bead straps, gilded stainless steel, length 10mm, thickness 4mm, inner tube diameter ca. 3,2mm, Fits 5 rows of Delica beads size #11

With a chain extender your bracelet or necklace is easily made longer, lightly twisted anchor chain, coin with 925 stamp on one side, gold plated sterling silver. For mounting with clasp, coin diameter 5 mm, coin thickness 0,5 mm, total length 2,5 cm, With a chain extender your jewellery can fit all.

6pcs., gold-plated brass, crimp end with eye, length (closed) 6.5mm., width 4mm., hole size 1mm, inner eye size 1.4mm. For an effective and simple closure of string necklaces. No tools or glue are required to mount them.

1 set., slide on Cord ends with clasp for weaved bead straps, gilded brass, length 28mm, thickness 4mm, inner tube diameter ca. 3,2mm, Fits 18 rows of Delica beads size #11

1 set., slide on Cord ends with clasp for weaved bead straps, gilded brass, length 15mm, thickness 4mm, inner tube diameter ca. 3,2mm, Fits 9 to 10 rows of Delica beads size #11

6 pcs. wire protector, gilded silver, length 4.5mm, diameter 4.5mm, hole size 0,8 mm. Suitable for Tigertail beading wire. You thread the wire through the U-shaped tube and secure it with a crimp bead. If you want to attach a clasp to it, you do that with the help of an eyelet.

2 pieces, wire end that can be crimped, as well as glued, on tiger-tail beading wire or thread. Made of gold plated Sterling silver, can be used for tigertail pearl wire up to 0,5 mm thickness, total length 13 mm, tube length 10,5 mm, outer tube diameter 1,3 mm, inner tube diameter 0,6 mm, inner eye diameter 1,5 mm, open loop.

40pcs., gilded stainless steel, extra strong, crimp/bead, diameter 2mm, length 1.5mm, inner hole size 0.8mm.

1 piece. jewelry clasp and findings mix in plastic box, gold plated brass. Head /Eye Pins, Folding Crimp Ends, Bead Tips Knot Covers/Ribbon Ends/Twist Chain Extensions, Alloy Lobster Claw Clasps, Brass Chains and Earring Hooks. 
Please note, as this is a low-cost product, we do not recommend these materials for resale, as the durability of the gold plating is limited.

For long wear resistance, it is recommended to apply jewellery lacquer before use.

Sizes:
Clasp: 10~12x6~7mm
Ribbon end: 8x8x5mm, hole: 2mm, 15pcs
Earring hook: 19mm long, hole: 1.5mm, 20pcs
Tip knot: 8x4mm, hole: 1.5mm, 30pcs
Bead cap: 6x1mm, hole: 1mm, 2g
Crimp end: 6x3mm, 2g
Drop: 6x3mm
Jump Ring: 4x0.7mm, 2.6mm inner diameter, 10g
Jump Ring: 6x0.7mm, 4.6mm inner diameter, 10g
Pin: 22x0.7mm, 10g
Chain extension: 50x3.5mm, 20strands
Ball Chain: 1x100cm
Twist Chain: 3m long, link: 2.5x1mm.

4pcs., gold-plated sterling silver crimp end with eye, length (closed) 6.5mm., width 3,5mm., hole size 1mm, inner eye size 1.4mm. For an effective and simple closure of string necklaces. No tools or glue are required to mount them.

10pcs. Chain spacer bar for 3 strands, 3 holes, gold plated brass, length 17mm, width 3mm, hole size 1,2mm.

10pcs. Chain connector for 4 strands, 4 holes and eye, gold plated brass, length 20mm, width 3mm, hole size 1,2mm. Can be cut off at the ends to fit a 2-row chain.

2pcs., slide on Miyuki cord ends for Weaved bead band, length 10mm, thickness 3mm, gilded brass. fits Delica beads size #11

98-102pcs. tubular wire clamps or crimp beads with extra strong metal thickness for better grip, gold-plated sterling silver, length 1.5 mm, diameter 2 mm, hole diameter 0.8 mm. Can be double threaded with tiger tail bead wire up to and including thickness 0.38 mm.

98-102pcs. crimp beads, tube shape, gold-plated Sterling silver, length 1.5mm, diameter 2mm, hole size 1mm.

250pcs., gilded brass, crimp/bead, diameter 1.5mm, length 1mm, inner hole size 0.8mm.

20pcs., gilded brass, crimp cover, glittering surface, diameter 4mm. Use to hide knots or crimps. Creates a small bead when gently squeezed around a knot.

10pcs. tubular wire clamps or crimp beads with extra strong thickness for better grip, gold-plated sterling silver, length 1.5 mm, diameter 2 mm, hole diameter 0.8 mm. Can be double threaded with tiger tail bead wire up to and including thickness 0.38 mm.

6pcs., slide on tube cord ends for weaved seed bead straps, gilded brass, length 7mm, tube diameter 3mm, inner tube diameter ca. 2mm, inner eye measures 1x1.5mm. Fits 4 rows of Delica beads size #11

6pcs., slide on tube cord ends for weaved seed bead straps, gilded brass, length 5.5mm, tube diameter 3mm, inner tube diameter ca. 2mm, inner eye measures 1x1.5mm. Fits 3 rows of Delica beads size #11

2pcs., sterling silver, open, bead diameter 4mm., total length 7,5mm., hole size 2mm., inner eye diameter 2mm. Use especially for a classic bead necklace on silk thread, which ends with 2-3 knots in a row close together. The knots are glued into the hole on the crimp end with strong glue.

2pcs., gilded sterling silver, with large closed eye, bead diameter 4mm, total length 8mm, hole size 2mm, inner eye diameter 3mm. Use especially for a classic bead necklace on silk thread.

20pcs., dark copper, crimp cover, bead tip, diameter 3mm. Use to hide knots or crimps. Creates a small bead when gently squeezed around a knot.

20pcs., dark copper, crimp cover, bead tip, diameter 4mm. Use to hide knots or crimps. Creates a small bead when gently squeezed around a knot.

2pcs., Tube cord ends for woven seed bead bracelets, length 40mm, tube thickness 4mm, inner loop diameter 2mm, gilded brass.

20pcs., antique bronze colored brass, crimp cover, bead tip, diameter 4mm. Use to hide knots or crimps. Creates a small bead when gently squeezed around a knot.

6pcs., slide on Cord ends for weaved bead straps, gilded brass, length 6mm, thickness 4mm, inner tube diameter ca. 3mm, inner eye measures 1x2mm. Fits 3 rows of Delica beads size #11

6pcs., gilded brass, crimp cord ends, crimp end for beading thread and wire, no glue necessary. Total length 6.5mm, width 2mm, inner hole diameter 1mm. inner eye diameter 1.5mm.

5 pieces. round slide-lock beads or stopper beads with rubber membrane, strong gilded brass, diameter 4 mm. flexible hole size 0.7mm, Hole is suitable for two 0.8 - 1 mm cords laid gold-filled, e.g. polyester cord. Serves as adjustable locking beads for, for example, bracelets. Cords are easily mounted by the use flexible wide-eye beading needles. The beads can also be used as a back fastening mechanism for earstuds or as spacers on ear chains.

5 pieces. round slide-lock beads or stopper beads with rubber membrane, strong gilded brass, diameter 4 mm. 0,7mm hole suitable for two 0.5 - 0.6 mm cords, e.g. polyester cord. Serves as adjustable locking beads or stopping bead for, for example, bracelets. Cords are easily mounted by the use flexible wide-eye beading needles. The beads can also be used as a back fastening mechanism for earstuds.

2pcs., gilded sterling silver cord end. Glue-in end: inner diameter 3mm, outer diameter 4mm. Eye diameter 2mm, length 12mm. Fits 3mm leather cord e.g.

6pcs. bead tip, clamp-on with gold-filled loop, for ball chain 3-4mm. gilded brass. Inner eye diameter on connector 2mm. The bead tip makes it possible to put jumprings in each end of the chain. Clasp it on the last ball on the chain or a knot and put a jumpring through the eyes to keep it firmly secured.

6pcs., gilded brass cord end. Glue-in end: outer diameter 8mm, inner diameter 7,5mm, eye diameter 1,5mm. Fits 7mm leather cord.

2pcs., gold plated sterlingsilver crimp end with eye, length (closed) 6mm., width 3mm., hole size 1mm, eye size 1,2mm. Makes an effective and simple closure of necklaces on string. Glue is recomended for mounting this end tip.

10pcs., gold plated brass, cord end, width 7mm, height 8 mm. Glue-in end: outer diameter 7mm, inner hole diameter 6mm. Inner hole diameter 1.5mm.

2pcs., gilded sterling silver, ribbon crimp end, width 7mm, length 6mm, with 925-stamp. Suitable as closing on wide bracelets. Pinch together around the cord end, possibly with some glue.

1pc., adjustable locking bead with rubber membrane, gilded Sterling silver, diameter 6mm, thickness 4mm. Suits the chains AR25 and AR30. and for single wire or cord with a thickness of 1.2 - 1.5 mm.

6pcs., spring shaped cord ends. gilded stainless steel, French wire style, length 8,5mm, outer diameter 4mm., inner hole diameter 2mm. inner eye diameter 2mm.

6pcs., slide on Cord ends for weaved bead straps, gilded brass, length 9mm, thickness 4mm, inner tube diameter ca. 3mm, inner eye measures 1x2mm. Fits 5 rows of Delica beads size #11

2pcs., adjustable locking bead with rubber, gilded Sterling silver, diameter 4mm, for 0.5mm cord gold-filled or 0.8mm single cord. The locking bead can be adjusted to fit your wrist or ankle. Use a beading needle and a set of pliers to add the bead.

2pcs., gilded sterling silver, with large closed eye, bead diameter 4mm, total length 8mm, hole size 2mm, inner eye diameter 3mm. Use especially for a classic bead necklace on silk thread.

100pcs. gold-plated metal, crimp bead, tube, length 1.5mm., diameter 1,5mm., hole size 1mm.

2pcs., gilded sterling silver cord end. Glue-in end: inner diameter 4mm, outer diameter 5mm. Eye diameter 2mm, length 12mm. Fits 4mm leather cord e.g.

6pcs., slide on Cord ends for weaved bead straps, gilded brass, length 13.5mm, thickness 5mm, inner tube diameter ca. 4mm, inner eye measures 1x2mm. Fits 9 rows of Delica beads size #11

1pc., gold-plated silver, chain extender with 925-mark coin pendant, for adjustable bracelets or necklaces, length 3 cm, coin thickness 0.8mm, coin diameter 6mm. With e-coat surface treatment for high durability and water resistance. With a chain extender, your bracelet or necklace is easily made longer,

2pcs., gold plated sterlingsilver crimp end with eye, length (closed) 6mm., width 3mm., hole size 0,8mm, eye size 1mm. Makes an effective and simple closure of necklaces on string. No tools or glue is needed for mounting this end tip.

6pcs., gilded sterling silver crimp bead cover, diameter 3mm. Used to hide knots or crimps. Forms a small bead when gently squeezed around a knot.

2pcs., adjustable locking bead with a 3mm eyelet and rubber, gilded sterling silver, diameter 4mm, for 0.9mm cord. The locking bead can be adjusted to fit your wrist or ankle. Use a beading needle and a set of pliers to add the bead.

2pcs., adjustable locking bead with rubber, gilded Sterling silver, diameter 4mm, for 0.5mm cord. The locking bead can be adjusted to fit your wrist or ankle. Use a beading needle and a set of pliers to add the bead.

6pcs., Cord ends for peyote stitch Delica bracelets, gilded brass, length 20mm, thickness 4mm, hole diameter 1mm, eye length 1.5mm, eye width 2mm. Fits 12 rows of delica beads.

2pc., gilded clasp set for leather cord etc., gilded brass. Total length 34mm, clasp measurements 12x7mm. The cord ends can be pressed tight around the cord. Fits 1.5 to 2mm cord.

10pcs., gilded brass cord end, crimp end, Total length 6mm, glue-in end: outer diameter 2mm, inner tube diameter 1.5mm. Eye diameter 1.8mm.

10pcs. crimp beads, tube shape, gold-plated Sterling silver, length 1.5mm, diameter 2mm, hole size 1mm.

2pcs., quality gilded steel locking heads for special ball shaped jewelry clasps with hinge. length 4mm, width 3mm.

2pcs., Miyuki cord ends for peyote stitch Delica bracelets, length 60mm, thickness 3mm, gilded brass.

2pcs., slide on Miyuki cord ends for weaved seed bead band, length 35mm, thickness 3mm, gilded brass. Suitable for Delica beads size #11

2pcs., quality gilded sterling silver, special locking heads for ball clasps. length 5mm., width 4.5mm.

10pcs., black brass, half-drilled cord end bead, diameter 3 mm, inner hole diameter 1mm. Makes it easy to assemble clasp on necklaces/bracelets. Is used with Memory Wire.

4pcs., cord ends, gold-plated brass, cone, length 6.5mm, width 4mm, inner hole size 1mm. Suitable cord ends on Memory wire