Glue-in ends & cord tips, silver

Crimp beads, tubular wire crimps, silver plated brass, 100 pcs, diameter 2 mm, length 2 mm, hole diameter 1 mm. Especially suitable for use with Magical crimper plier.

4pcs., cord ends for weaved beads, Stainless steel, length 40mm, thickness 4mm, inner tube diameter ca. 3mm, eye size 1x2mm. Please note that the picture with the wristband does not show the actual product, only how to use it.

6pcs., cord ends for weaved beads, Stainless steel, length 25mm, thickness 4mm, inner tube diameter ca. 3mm, eye size 1x2mm. Please note that the picture with the wristband does not show the actual product, only how to use it.

6pcs., cord ends for weaved beads, Stainless steel, length 20mm, thickness 4mm, inner tube diameter ca. 3mm, eye size 1x2mm. Please note that the picture with the wristband does not show the actual product, only how to use it.

6pcs., cord ends for weaved beads, Stainless steel, length 16mm, thickness 4mm, inner tube diameter ca. 3mm, eye size 1x2mm. Please note that the picture with the wristband does not show the actual product, only how to use it.

6pcs., cord ends for weaved beads, Stainless steel, length 13mm, thickness 4mm, inner tube diameter ca. 3mm, eye size 1x2mm.

6pcs., short tube cord ends for weaved beads, stainless steel, length 6mm, thickness 4mm, inner tube diameter ca. 3mm, eye size 1x2mm.

1 locking set for necklaces and bracelets, consisting of clamp endings, chain extender and steel carabiner. suitable for leather cord and similar with a thickness of 1,5-2 mm. extension chain measures 50 mm. The lock measures 10 mm. The endings are mounted by clamping them around the ends of the cord with pliers.

1 locking set for necklaces and bracelets, consisting of clamp endings, chain extender and steel carabiner. suitable for leather cord and similar with a thickness of 2-3 mm. extension chain measures 50 mm. The lock measures 10 mm. The endings are mounted by clamping them around the ends of the cord with pliers.

1 set., slide on Cord ends with clasp for weaved bead straps, silver plated brass, length 8mm, thickness 4mm, inner tube diameter ca. 3,2mm, Fits 5 rows of Delica beads size #11

4 pcs, rounded clamp endings for ribbons and similar, width 13 mm, depth with eyelet 9 mm, suitable for ending woven bracelets. Clamp around the end of the ribbon, optionally with a dab of glue. Fits 12-14 mm wide tape

10 pcs, crimp cover, stainless steel, durable coating, Crimp bead or knot cover, diameter 3 mm, Used to hide knots or wire clamps. Form a nice little ball when gently squeezed around a knot

200pcs., silver plated brass crimp bead, diameter 4mm, length 2mm, inner hole size 3mm.

1 set., slide on Cord ends with clasp for weaved bead straps, silver plated brass, length 20mm, thickness 4mm, inner tube diameter ca. 3,2mm, Suitable for 11-12 rows woven with Delica beads size #11, for example.

1 set., slide on Cord ends with clasp for weaved bead straps, platinum plated brass, length 13mm, thickness 4mm, inner tube diameter ca. 3,2mm

1 set., slide on Cord ends with clasp for weaved bead straps, silver plated brass, length 40mm, thickness 4mm, inner tube diameter ca. 3,2mm, Fits 25-26 rows of Delica beads size #11

6pcs., cord end in stainless steel, length 6,5mm., outer diameter 4,5mm., inner diameter 4mm., depth 4,5mm.

4 pcs, cord terminator without eye, with flat end, stainless steel, length 7 mm, outer diameter 6 mm, inner hole diameter 5 mm, depth 5,5 mm. The ends are typically glued to the string with super glue.

1 locking set of steel, consisting of chain extender and lobster clasp. Chain extender measures 55 mm incl. drop and eyelet. Clasp measures 10 mm (13 mm incl. eyelet)

2 chain ends made of stainless steel, outer diameter 8.5 mm, inner diameter 6 mm, inner eyelet diameter 7x9 mm, length 19 mm, to be mounted with jewellery adhesive.

10pcs. bead tip or crimp cover with eye, clamp-on, for ball chain 4mm and the like. Nickel free silver plated metal. Inner eye diameter on connector 3-4mm. The bead tip makes it possible to put jumprings in each end of the chain. Clasp it on the last ball on the chain and put a jumpring through the eyes to keep it firmly secured.

1pc., cord ends for necklace or bracelets, with flat lobster claw clasp and cup end, sterling silver, total length 30mm, outer cup diameter 7mm, inner cup diameter 6mm.

1pc., cord ends for necklace or bracelets, with flat lobster claw clasp and cup end, sterling silver, total length 25mm, outer cup diameter 6mm, inner cup diameter 5mm.

Chain extender for mounting with clasp, pea chain with 3 adjustment levels, total length 6 cm, jumpring diameter 4 mm, sterling silver, 1 piece. With a chain extender, your bracelet or necklace can fit any size.

Chain extender for mounting with clasp, Saturn chain, with 3 adjustment levels, total length 6 cm, jumpring diameter 4 mm, sterling silver, 1 piece. With a chain extender, your bracelet or necklace can fit any size.

6 pcs, cord terminator without eye, with flat end, steel, length 5 mm, outer diameter 4.5 mm, inner hole diameter 4 mm, depth approx. 3.8 mm. The ends are typically glued to the string with super glue.

6pcs., silver plated brass cup for rhinestone chain 3mm, fold the two arms over the stone at the chain end to secure it. Diameter 3,5x3,5mm.

1 set., slide on Cord ends with clasp for weaved bead straps, platinum plated brass, length 16mm, thickness 4mm, inner tube diameter ca. 3,2mm

2 pieces, stamp plate og chain tab, length 9 mm, width 4 mm, thickness 0.9 mm, smallest hole diameter 0.8 mm, largest hole diameter 2 mm, with 925 stamp on one side. Typically used at the end of a chain as an eye for the clasp.

6pcs., tube cord ends for bead weaving, stainless steel, length 8mm, thickness 4mm, inner tube diameter ca. 3mm, eye size 1x2mm.

6pcs., cord ends for weaved beads, Stainless steel, length 10mm, thickness 4mm, inner tube diameter ca. 3mm, eye size 1x2mm.

6pcs., short cord ends for weaved beads, gunmetal coloured brass, length 6mm, thickness 4mm, inner tube diameter ca. 3mm, eye size 1x2mm. Fits 3 rows of Delica beads size #11

10 pcs, grooved cord-end in black brass / gunmetal, length 9 mm, width 6 mm, inner hole diameter 4.5 mm, inner eye diameter 1.5 mm, mounted with jewelry glue.

20pcs., cord end in black brass, length 5mm., outer diameter 3mm., inner diameter 2,5mm., depth 4mm.

150pcs., crimp/spacer bead, silver-plated brass, diameter 4mm., length 3mm., inner hole size 3mm.

10pcs. bead tip or crimp cover with eye, clamp-on, for ball chain 3mm and the like. Nickel free silver plated metal. Inner eye diameter on connector 2mm. The bead tip makes it possible to put jumprings in each end of the chain. Clasp it on the last ball on the chain and put a jumpring through the eyes to keep it firmly secured.

Crimp bead set in silver, gold plated, black and copper, 125 pieces of each colour, Crimp bead, diameter 2 mm, length 2 mm, hole diameter 1 mm. Especially suitable for use with Magical crimper pliers.

98-102pcs. crimps in sterling silver, length 1.5mm., diameter 2mm., hole size 1mm.

1 set., slide on Cord ends with clasp for weaved bead straps, platinum plated brass, length 10mm, thickness 4mm, inner tube diameter ca. 3,2mm

1 set., slide on Cord ends with clasp for weaved bead straps, platinum plated brass, length 20mm, thickness 4mm, inner tube diameter ca. 3,2mm

With a chain extender your bracelet or necklace is easily made longer, lightly twisted anchor chain, coin with 925 stamp on one side, sterling silver. For mounting with clasp, coin diameter 5 mm, coin thickness 0,5 mm, total length 2,5 cm, With a chain extender your jewellery can fit all.

2pcs., sterling silver cord end. Glue-in end: outer diameter 4.5mm., inner diameter 4mm. Eye diameter (inner) 2,5mm. Fits 3.5 to 4mm. leather cord.

6pcs., silver plated brass, crimp end with eye, length (closed) 6.5mm., width 4mm., hole size 1mm, inner eye size 1.4mm. Makes an effective and simple closure of necklaces on string. No tools or glue is needed for mounting this end tip.

1 set., slide on Cord ends with clasp for weaved bead straps, silver plated brass, length 28mm, thickness 4mm, inner tube diameter ca. 3,2mm, Fits 9 to 10 rows of Delica beads size #11

1 set., slide on Cord ends with clasp for weaved bead straps, silver plated brass, length 15mm, thickness 4mm, inner tube diameter ca. 3,2mm, Fits 9 to 10 rows of Delica beads size #11

10pcs., iron coloured, chain connector or chain tabs, length 7mm, width 4mm, smallest diameter 1mm.Typically used at the end of a chain as the grabbing eye for the lock.

2pcs., crimp cord end, Sterling silver, length 7mm., width 3mm., inner eye diameter 1.5mm., fits 1 to 1.5mm thick cord.

2 pieces, wire end that can be crimped, as well as glued, on tiger-tail beading wire or thread. Made of Sterling silver, can be used for tigertail pearl wire up to 0,5 mm thickness, total length 13 mm, tube length 10,5 mm, outer tube diameter 1,3 mm, inner tube diameter 0,6 mm, inner eye diameter 1,5 mm, open loop.

2pcs., sterling silver cord end, square. Glue-in end: inner diameter 2.2x2.2mm., outer diameter 3x3mm. inner eye diameter 2,5mm., length 11,5mm.

2pcs., square cord ends, acrylic, silver color, glue-in ends, outer measures 20x20mm, inner measures 17x17mm, length 25mm, Inner eye diameter 3mm.

200pcs., crimp/spacer bead, silver-plated brass, diameter 2.5mm., length 1.5mm., inner hole size 1.5mm.

300pcs., crimp/spacer bead, silver-plated brass, diameter 1.5mm., length 1mm., inner hole size 0.8mm.

4pcs., chain connector or chain tabs of Sterling silver, length 5.5mm, width 4mm, thickness 0.3mm, hole size 1x4mm. Typically used at the end of a chain as the grabbing eye for the lock.

2pcs., cord end in stainless steel. Glue-in ends: outer diameter 7mm, inner diameter 5mm. Inner eye diameter 3mm, length 14mm.

4pcs., silver plated brass, ekstra large cord end. Glue-in end: inner diameter approx. 13mm, length 16mm, inner eye diameter 2mm.

2pcs., sterling silver cord end. Glue-in end: outer diameter 4.5mm., inner diameter 4mm. Loop diameter (inner) 2mm., the loop is open,

10pcs. crimps in sterling silver, length 1.5mm., diameter 2mm., hole size 1mm.

1 piece. jewelry clasp and findings mix in plastic box, silver plated brass. Head /Eye Pins, Folding Crimp Ends, Bead Tips Knot Covers/Ribbon Ends/Twist Chain Extensions, Alloy Lobster Claw Clasps, Brass Chains and Earring Hooks.

For long wear resistance, it is recommended to apply jewellery lacquer before use.

Sizes:
Clasp: 10~12x6~7mm
Ribbon end: 8x8x5mm, hole: 2mm, 15pcs
Earring hook: 19mm long, hole: 1.5mm, 20pcs
Tip knot: 8x4mm, hole: 1.5mm, 30pcs
Bead cap: 6x1mm, hole: 1mm, 2g
Crimp end: 6x3mm, 2g
Drop: 6x3mm
Jump Ring: 4x0.7mm, 2.6mm inner diameter, 10g
Jump Ring: 6x0.7mm, 4.6mm inner diameter, 10g
Pin: 22x0.7mm, 10g
Chain extension: 50x3.5mm, 20strands
Ball Chain: 1x100cm
Twist Chain: 3m long, link: 2.5x1mm.

4pcs., sterlingsilver crimp end with eye, length (closed) 6mm., width 3mm., hole size 1mm, eye size 1mm. Makes an effective and simple closure of necklaces on string. No tools or glue is needed for mounting this end tip.

10pcs. Chain spacer bar for 3 strands, 3 holes, silver plated brass, length 17mm, width 3mm, hole size 1,2mm.

10pcs. Chain connector for 4 strands, 4 holes and eye, silver plated brass, length 20mm, width 3mm, hole size 1,2mm. Can be cut off at the ends to fit a 2-row chain.

2pcs., Miyuki cord ends for peyote stitch Delica bracelets, length 10mm, thickness 3mm, light steel coloured brass.

98-102pcs. tubular wire clamps or clamp beads with extra strong thickness for better grip, Sterling silver, length 1.5 mm, diameter 2 mm, hole diameter 0.8 mm. Can be double threaded with tiger tail bead wire up to and including thickness 0.38 mm.

2pcs., sterlingsilver crimp end with eye, length (closed) 6,5mm., width 2,5mm., hole size 1,5mm, eye size 2mm. Makes an effective and simple closure of necklaces on string. Glue is recomended for mounting this end tip.

20pcs. bead tip or crimp cover with eye, clamp-on, for ball chain 1,5mm and the like. Nickel free silver plated metal. Inner eye diameter on connector 0,8mm. The bead tip makes it possible to put jumprings in each end of the chain. Clasp it on the last ball on the chain and put a jumpring through the eyes to keep it firmly secured.

6pcs., Cord ends for peyote stitch Delica bracelets, dark metal coloured brass, length 9mm, thickness 5mm, inner tube diameter ca. 4mm, inner eye mesures 1x2mm. Fits 5 rows of Delica beads size #11

6pcs., gilded brass, crimp cord ends, crimp end for beading thread and wire, no glue necessary. Total length 6.5mm, width 2mm, inner hole diameter 1mm. inner eye diameter 1.5mm.

10pcs. tubular wire clamps or clamp beads with extra strong thickness for better grip, Sterling silver, length 1.5 mm, diameter 2 mm, hole diameter 0.8 mm. Can be double threaded with tiger tail bead wire up to and including thickness 0.38 mm.

1pc., Bead cap with loop, sterling silver, outer diameter 6.5mm, inner hole diameter 5mm, height 9.5mm, inner loop diameter 1.5mm. For glueing

6pcs., slide on tube cord ends for weaved seed bead bracelets and the like, silver plated brass, length 7mm, tube diameter 3mm, inner tube diameter ca. 2mm, inner eye measures 1x1.5mm. Fits 4 rows of Delica beads size #11

6pcs., slide on tube cord ends for weaved seed bead bracelets and the like, silver plated brass, length 5.5mm, tube diameter 3mm, inner tube diameter ca. 2mm, inner eye measures 1x1.5mm. Fits 3 rows of Delica beads size #11

300pcs. gun metal plated brass, dark metal color, length 2,5mm., diameter 2,5mm., hole size 2mm.

2pcs., length 8,2mm., bead diameter 4mm., hole size 2mm., inner eye diameter 1,5mm. Make 2-3 knots close together at the end of the necklace which are pushed into the bead with a dab of glue, so that the knots can not be pulled out once the glue has hardened. Place the clasp into the open ring. See our guides section for explanation

6pcs., short cord ends for weaved beads, silver coloured brass, length 6mm, thickness 4mm, inner tube diameter ca. 3mm, eye size 1x2mm. Fits 3 rows of Delica beads size #11

6pcs., Cord ends for weaved beads, platinum coloured brass, length 6mm, thickness 4mm, inner tube diameter ca. 3mm, eye size 1x2mm. Fits 3 rows of Delica beads size #11

300pcs. gun metal plated brass, dark metal color, length 1,5mm., diameter 1,5mm., hole size 1mm.

300pcs., black gun metal crimp beads / spacer beads, black, diameter 1.5mm, length 1mm, inner hole size 0.5mm.

5 pieces. round slide-lock beads or stopper beads with rubber membrane, durable silver plated brass, diameter 4 mm. Hole suitable for two 1,2 mm cords laid gold-filled, e.g. polyester cord. Serves as adjustable locking beads for, for example, bracelets. Cords are easily mounted by the use flexible wide-eye beading needles. The beads can also be used as a back fastening mechanism for earstuds or as spacers on ear chains.

5 pieces. round slide-lock beads or stopper beads with rubber membrane, durable silver plated brass, diameter 4 mm. Hole suitable for two 0.8 - 0.9 mm cords laid gold-filled, e.g. polyester cord. Serves as adjustable locking beads for, for example, bracelets. Cords are easily mounted by the use flexible wide-eye beading needles. The beads can also be used as a back fastening mechanism for earstuds or as spacers on ear chains.

5 pieces. round slide-lock beads or stopper beads with rubber membrane, durable silver plated brass, diameter 4 mm. Hole suitable for two 0.5 - 0.6 mm cords laid gold-filled, e.g. polyester cord. Serves as adjustable locking beads for, for example, bracelets. Cords are easily mounted by the use flexible wide-eye beading needles. The beads can also be used as a back fastening mechanism for earstuds or as spacers on ear chains.

200pcs., black gun metal crimp beads / spacer beads, black, diameter 2mm, length 1.2mm, inner hole size 1.2mm.

2pcs., sterling silver, ribbon crimp end, width 10mm, length 7.5mm. Suitable as closing on wide bracelets. Pinch together around the cord end, possibly with some glue.

2pcs., sterling silver, ribbon crimp end, width 7mm, length 6mm, with 925-stamp. Suitable as closing on wide bracelets. Pinch together around the cord end, possibly with some glue.

2pcs., cone shaped cord end for Bola-tie, silver plated brass, length 25mm., outer diameter 6mm., inner diameter 5mm., depth 20mm.

6pcs., spring shaped cord ends, platinum color metal, nickelfree, French wire style, length 10mm, outer diameter 4,5mm., inner hole diameter 3,2mm. inner eye diameter 3,5mm.

6pcs., spring shaped cord ends. stainless steel, french wire style, length 11mm, outer diameter 5mm., inner hole diameter 4mm. inner eye diameter 4mm.

6pcs., spring shaped cord ends. stainless steel, length 9mm, French wire style, outer diameter 4mm., inner hole diameter 2,5mm. inner eye diameter 2,5mm.

2 sets., silver-plated clasp set with crimp ends for leather cord etc., silver-plated brass. Total length 30mm, clasp measurements 12x7mm. The cord ends can be pressed tight around the cord. Fits 2 to 2.5mm cord.

1pc., sterling silver cord end, square. Glue-in end: inner diameter 3.5x3.5mm., outer diameter 4.5x4.5mm. inner Eye diameter 2,5mm., length 11mm.

6pcs., cord ends without loop, rounded tip, stainless steel, length 7mm., outer diameter 3mm., inner diameter 2,5mm., depth 6mm.

2pcs., sterlingsilver crimp end with eye, length (closed) 6,5mm., width 4mm., eye size 1,2mm. Makes an effective and simple closure of necklaces on string. Glue is recomended for mounting this end tip.

2pcs., adjustable locking bead with rubber, Sterling silver, diameter 3mm, for 0.5 - 0.8 mm gold-filled cord. The locking bead can be adjusted to fit your wrist or ankle. Use a beading needle and a set of pliers to add the bead.

150pcs., crimp/spacer bead, silver-plated brass, diameter 2mm., length 1.5mm., inner hole size 1mm.

75pcs., Large black gun-metal crimp beads or spacer beads, diameter 4mm, length 3mm, inner hole size 3mm.

6pcs. wire-guard, sterling silver wireguard, length 4.5mm., diameter 4.5mm, hole size 0.8mm. Suitable for Tigertail thread. Place thread in the pre-curved horseshoe shape and tighten, which creates a solid nice eye for attaching clasp or jumpring.

4 pcs, sterling silver, knot bead ending with eye, ball diameter 3.5 mm, length folded 7 mm, width 3.5 mm, hole diameter 1 mm, eye diameter 1.2 mm. Makes an effective and simple ending for bead chains on wire. No glue or tools are needed to install this termination. Thread the termination onto the wire, tie a knot or two and clamp the termination around the knot (requires pointed or wide-nose pliers)

4 pcs., round locking beads or beads for attaching pendants on a necklace or bracelet. with 1 mm eye, silver plated brass, diameter 4 mm. Hole for 0,9 mm cord, e.g. polyester. Can be used as adjustable locking bead. Note when used as a sliding locking bead: does not contain rubber membrane, so strength of lock depends on cords used being tight enough by themselves.