Fish charms, 18K gold-plated brass, 18x17.5x4.5 mm, hole 1.2 mm, 4 pcs

Fish charms, 18K gold-plated brass, 18x17.5x4.5 mm, hole 1.2 mm, 4 pcs

EUR 3,61


4 fish charms in brass with 18K gold plating. Approx. 18x17.5x4.5 mm with an approx. 1.2 mm hole.


Model/Product no.: 2287Efg-18x17.5mm


Material Gold plated brass
Colour Gold

Customers who bought this product also bought

Kit for making 2 necklaces and bracelets, including clasps, thread, wire clips, etc.

3133fgA-0.38mm


A kit for making necklaces with beads ranging in size from 8 mm to 14 mm. The kit contains 2 metres of 0.38 mm beading wire (tiger tail), 10 pcs wire crimp beads, 2 pcs 11 mm lobster clasps and 10 pcs closed jump rings size 5x0,8mm in the appropriate size.
To close the wire clamps, you will need a chain nose pliers or wire-crimping pliers (not included).
The length of a standard necklace is approx. 44 cm. Therefore, if you divide 44 cm by the diameter of your chosen beads in cm, you will see the required number of beads. All types of beads can be used.

EUR 12,63

Show product

Water-based all-round lacquer suitable as jewellery lacquer for gold and silver plating, clear, 5 ml

31141-6ml


5 ml. bottle with brush. Milky white lacquer that dries to an invisible finish, water-based surface lacquer that enhances all surface coatings and protects against any allergens from the metal. The lacquer is brushed onto exposed areas of gold-plated or silver-plated jewellery parts. Lasts approximately 3-6 months with normal use, after which it is recommended to repeat the application. You can apply several coats afterwards for extra strength. The varnish also prevents oxidation and other discolouration of silver and other metals.
 

Teknos Clear Aqua Lacquer
is a high-quality, water-based product for protecting a wide range of surfaces. Apply the varnish with a brush on a cleaned surface, place the item on a hard surface, not paper, as it will stick. The varnish dries in 1-2 hours in a well-ventilated location.

Contents 5ml. causes eye irritation on contact (rinse with water), keep out of reach of children, non-flammable.

EUR 7,60

Show product

Large material mix box, headpins, ear hooks, bead caps, jumprings, gold-plated brass, 1 pc

1886SKfg


1 piece. jewelry clasp and findings mix in plastic box, gold plated brass. Head /Eye Pins, Folding Crimp Ends, Bead Tips Knot Covers/Ribbon Ends/Twist Chain Extensions, Alloy Lobster Claw Clasps, Brass Chains and Earring Hooks. 
Please note, as this is a low-cost product, we do not recommend these materials for resale, as the durability of the gold plating is limited.

For long wear resistance, it is recommended to apply jewellery lacquer before use.

 

Sizes:
Clasp: 10~12x6~7mm
Ribbon end: 8x8x5mm, hole: 2mm, 15pcs
Earring hook: 19mm long, hole: 1.5mm, 20pcs
Tip knot: 8x4mm, hole: 1.5mm, 30pcs
Bead cap: 6x1mm, hole: 1mm, 2g
Crimp end: 6x3mm, 2g
Drop: 6x3mm
Jump Ring: 4x0.7mm, 2.6mm inner diameter, 10g
Jump Ring: 6x0.7mm, 4.6mm inner diameter, 10g
Pin: 22x0.7mm, 10g
Chain extension: 50x3.5mm, 20strands
Ball Chain: 1x100cm
Twist Chain: 3m long, link: 2.5x1mm.

EUR 23,07

Show product