Kit for making 2 lightweight necklaces or bracelets, incl. clasps, thread, wire etc.

Special crimp bead pliers made by Xuron for the proper clamping of crimp beads. Almost indispensable if you want to make necklaces that last, for example when working with Tigertail wire.

Special pliers for proper clamping of crimp beads, for example when making necklaces with Tiger-tail wire. Almost indispensable when making necklaces and bracelets with beads which shall reallly last long. Suitable for crimp beads with a diameter of 1.5–2 mm.
See our guide for crimping pliers here.

Wire crimping pliers, also known as crimp bead pliers, for the correct crimping of wire crimps, for example when making bead necklaces using tigertail wire. This model, with a light green rubber handle, features three different jaw sizes, suitable for the most common sizes of wire clamps ranging from 1.2 mm up to 2 mm in diameter. It also has a practical pointed tip, meaning it can also be used as small pointy nose pliers.

Special crimp bead pliers made by Xuron for the proper clamping of crimp beads. Almost indispensable if you want to make necklaces that last, for example when working with Tigertail wire.

Magical crimper Converts 2 mm tubular wire clips into round beads while crimping. No sharp edges, Safe, quick and easy. Professional finish for your jewellery. For use with 2 mm tubular wire clips.

A kit for making necklaces with beads ranging in size from 2 mm to 6 mm. The kit contains 2 metres of 0.3 mm beading wire (tiger tail), 10 pcs wire crimp beads, 2 pcs 9 mm lobster clasps and 10 pcs closed jump rings size 4x0,7mm.
To close the wire clamps, you will need a chain nose pliers or wire-crimping pliers (not included).
The length of a standard necklace is approx. 44 cm. Therefore, if you divide 44 cm by the diameter of your chosen beads in cm, you will see the required number of beads. The length of a standard bracelet is typically 18 mm. All types of beads can be used.

A kit for making necklaces with beads ranging in size from 8 mm to 14 mm. The kit contains 2 metres of 0.38 mm beading wire (tiger tail), 10 pcs wire crimp beads, 2 pcs 11 mm lobster clasps and 10 pcs closed jump rings size 5x0,8mm in the appropriate size.
To close the wire clamps, you will need a chain nose pliers or wire-crimping pliers (not included).
The length of a standard necklace is approx. 44 cm. Therefore, if you divide 44 cm by the diameter of your chosen beads in cm, you will see the required number of beads. All types of beads can be used.

10 pcs, Lobster clasp, jewellery clasp, sterling silver, with 925-mark, length 9 mm, width 5 mm, thickness 3 mm.

1pcs., lobster claw clasp for jewelry, sterling silver, length 9mm.

1 spool (50m), Tigertail beading wire, diameter 0.3mm.Ideal for uneven and sharp-edged pearls/beads.

10pcs. crimps in sterling silver, length 1.5mm., diameter 2mm., hole size 1mm.