Jewelry findings set, large mix with ear hooks, clasps, earring backs, jump rings and more, appx. 2900 pcs, 1 set

5 ml. bottle with brush. Milky white lacquer that dries to an invisible finish, water-based surface lacquer that enhances all surface coatings and protects against any allergens from the metal. The lacquer is brushed onto exposed areas of gold-plated or silver-plated jewellery parts. Lasts approximately 3-6 months with normal use, after which it is recommended to repeat the application. You can apply several coats afterwards for extra strength. The varnish also prevents oxidation and other discolouration of silver and other metals.
 

Teknos Clear Aqua Lacquer
is a high-quality, water-based product for protecting a wide range of surfaces. Apply the varnish with a brush on a cleaned surface, place the item on a hard surface, not paper, as it will stick. The varnish dries in 1-2 hours in a well-ventilated location.

Contents 5ml. causes eye irritation on contact (rinse with water), keep out of reach of children, non-flammable.

1pc. spacer bead mix in plastic box, shiny, silver and gold colored metal, 2 - 2.5 - 3 mm in diameter, hole diameters 1 - 1.5mm, box contains approx. 1160 beads.

1 piece. jewelry clasp and findings mix in plastic box, silver plated brass. Head /Eye Pins, Folding Crimp Ends, Bead Tips Knot Covers/Ribbon Ends/Twist Chain Extensions, Alloy Lobster Claw Clasps, Brass Chains and Earring Hooks.

For long wear resistance, it is recommended to apply jewellery lacquer before use.

Sizes:
Clasp: 10~12x6~7mm
Ribbon end: 8x8x5mm, hole: 2mm, 15pcs
Earring hook: 19mm long, hole: 1.5mm, 20pcs
Tip knot: 8x4mm, hole: 1.5mm, 30pcs
Bead cap: 6x1mm, hole: 1mm, 2g
Crimp end: 6x3mm, 2g
Drop: 6x3mm
Jump Ring: 4x0.7mm, 2.6mm inner diameter, 10g
Jump Ring: 6x0.7mm, 4.6mm inner diameter, 10g
Pin: 22x0.7mm, 10g
Chain extension: 50x3.5mm, 20strands
Ball Chain: 1x100cm
Twist Chain: 3m long, link: 2.5x1mm.

1 pack of mixed beads in a round plastic box, shiny silver and gold-coloured metal beads, round, 3–4–5–6 mm in diameter, hole diameter 1–2 mm

1pc. beadmix, stardust and shiny, silver and gold coloured, 4-6 mm in diameter, hole diameter 1mm, box contains approx. 990 beads.

1 piece. jewelry clasp and findings mix in plastic box, gold plated brass. Head /Eye Pins, Folding Crimp Ends, Bead Tips Knot Covers/Ribbon Ends/Twist Chain Extensions, Alloy Lobster Claw Clasps, Brass Chains and Earring Hooks. 
Please note, as this is a low-cost product, we do not recommend these materials for resale, as the durability of the gold plating is limited.

For long wear resistance, it is recommended to apply jewellery lacquer before use.

Sizes:
Clasp: 10~12x6~7mm
Ribbon end: 8x8x5mm, hole: 2mm, 15pcs
Earring hook: 19mm long, hole: 1.5mm, 20pcs
Tip knot: 8x4mm, hole: 1.5mm, 30pcs
Bead cap: 6x1mm, hole: 1mm, 2g
Crimp end: 6x3mm, 2g
Drop: 6x3mm
Jump Ring: 4x0.7mm, 2.6mm inner diameter, 10g
Jump Ring: 6x0.7mm, 4.6mm inner diameter, 10g
Pin: 22x0.7mm, 10g
Chain extension: 50x3.5mm, 20strands
Ball Chain: 1x100cm
Twist Chain: 3m long, link: 2.5x1mm.

1 piece. jewelry material mix in plastic box, contains approx. 100 headpins and eyepins, about 30 pairs of ear hooks, about 60 bead caps, approx. 100 jumprings size 5-6 mm, about 30 spacer beads, Add only beads and pliers and you can get started making fine earrings. Please note we do not recommend these materials in connection with resale, as the durability of the gold coating may vary.