Appliances, glue, accessories

solid cast iron bench block, hard work surface for silver and metalwork, length 10.5 cm, width 10.5 cm, height 1.5 cm, weight 1.1 kg.

1 set with 6 tool pieces for bracelet braiding and knotting, made from platinum-color aluminum alloy. Includes pieces approx. 168x6.5x4 mm, 78x5 mm, 78x3 mm, 68x3x1.5 mm, 195x62.5x4 mm and a 330 mm piece with an approx. 170x15 mm pendant.

1 set with a cast steel table bench vise featuring a 360° swivel base, plus 2 pairs of non-slip cotton gloves. The vise measures approx. 209x151x64 mm. The gloves measure approx. 225-235x135x3 mm.

1 pc. DIY wine bottle stopper that can be decorated with beads. Made of gold-tone alloy with a black cone-shaped silicone stopper. Approx. 114.5 mm long and 21.5 mm in diameter.

Magnifying glass made of ABS plastic, with metal fittings, acrylic optical lens, LED light, stainless steel colour, 2 lenses in one, magnification: 2.5X, lens: 107 mm, magnification: 5X, lens: 22 mm, length including arm and clamp 310 mm, magnifier width 135 mm, magnifier height 25 mm. Requires 3 AAA batteries, not included.

2 spare tips for the THREAD ZAPP II device, a battery-powered thread sealer and cutter for elastic, nylon thread, polyester cord and cord made from other heat-sealable synthetic materials. The tip may wear out over time and can therefore be replaced.

1 x battery-powered wire sealer and cutter for elastic, nylon thread, polyester cord and cord made from other heat-sealable synthetic materials. Requires 1 x AA battery (not included). Instructions in English included. Not suitable for leather cord, cotton cord, metal wires or cords thicker than 2 mm.  The tip may wear out over time and can therefore be replaced.

Practical special tweezers with cup-shaped tip, grain tongs, which make it easy to pick up individual beads, pills and the like, and ensure a good grip on beads. stainless steel, best suited for beads with a diameter of around 6-12 mm.

Practical special tweezers with cup-shaped tip, grain tongs, which make it easy to pick up individual beads, pills and the like, and ensure a good grip on beads. Indispensable for any bead enthusiast, stainless steel, best suited for beads with a diameter of around 4-8 mm.

Meyco jewelry glue, special adhesive for gluing rhinestones with a fine tip for precise application. Can also be used for gemstones. High adhesive strength. Adheres to fabric, wood, cardboard, paper and similar materials. Washable at 30°C. Available in a 25-gram plastic tube.

Wire rounding pliers with wooden handle. Easily rounds the tip of sharp metal wire ends on 0.8 to 1,2 mm thick wire. Length 14 cm, thickness 10 mm. metal and wood. The cup on the tip of the rounding tool is pressed down over the wire end while rotating it back and forth a few times.

Wire rounding pliers with wooden handle. Easily rounds the tip of sharp metal wire ends on 0.5 to 1 mm thick wire. Length 14 cm, thickness 10 mm. metal and wood. The cup on the tip of the rounding tool is pressed down over the wire end while rotating it back and forth a few times.

Wire rounding pliers with wooden handle. Easily rounds the tip of sharp metal wire ends on 0.4 to 0.6 mm thick wire. Length 14 cm, thickness 10 mm. metal and wood. The cup on the tip of the rounding tool is pressed down over the wire end while rotating it back and forth a few times.

3 different sizes of rounding pliers with wooden handle. Easily rounds the tip of sharp metal wire ends on 0.4 to 1.2 mm thick wire. Length 14 cm, thickness 10 mm. metal and wood. The cup on the tip of the rounding tool is pressed down over the wire end while rotating it back and forth a few times.

Set with 4 different needles with internal thread, 1 wedge and 1 heavy-duty sewing needle for working with rope, paracord and similar materials, made of stainless steel. Threaded needles measure 8 cm in length, with internal hole sizes of 4.5 mm, 3.7 mm, 3.5 mm and 1.7 mm. Sewing needle thickness 2 mm, sewing needle inner eye width 1.5 mm. A must-have if you work with DIY macramé knotting with parachute cord etc. Comes in a black fabric bag.

Go to our paracord section here

Set of 5 jewellery hammers for jewellery making and silver work. With varying striking surfaces. The hammers are made of stainless steel with a wooden handle, length 22 cm, depth 6.5 cm, width without striking surfaces 13 mm. Suitable for processing jewellery parts such as silver plate, wire, etc. Practical wooden tool holder included.

Hammer for jewellery making and silver work. With 9 different interchangeable stainless steel striking surfaces / trajectories as shown. The hammer is made of stainless steel with a wooden handle, length 25 cm, depth 7 cm, width without striking surfaces 25 mm. Suitable for processing jewellery parts such as silver plate, wire, etc. The striking surfaces can be unscrewed and replaced as needed.

Smart jewellery making tool, Brass Rings, Assistant Tool, for Buckling, Open and Close Jump Ring, stainless steel, measures ring size 52, can be used on all fingers. Makes it easy to open and close a loop or jump ring while holding on to something completely different.

Smart jewellery making tool, Brass Rings, Assistant Tool, for Buckling, Open and Close Jump Ring, nickel free brass, measures ring size 52, can be used on all fingers. Makes it easy to open and close a loop or jump ring while holding on to something completely different.

Hammer for jewellery making and silver work. With 11 different interchangeable stainless steel striking surfaces. The hammer is made of stainless steel with a black wooden handle, length 23 cm, depth 7 cm, width without striking surfaces 14 mm. Suitable for processing jewellery parts such as silver plate, wire, etc. Umbracon key included

Kumihimo plate in white foam, square shape. Used for kumihimo-style braiding. 40 slots, 10x10x0,9cm.

Ring measuring kit, find your ring size, with European units, handy tool for measuring diameter and size of finger rings, iron on steel wire, inner diameter from 13.5-25mm, corresponding to measurements 42 to 76 (circumference in mm).

2 pcs, large practical clamps to stop beads on a necklace or bead strands from falling off. Comes with comfortable white clamp tips. The spring alone measures length 12mm, width 10,5mm, plus the clamping tips each measure 14 mm in length.

4 pcs, practical clamp to stop beads on a necklace or bead strands from falling off. Comes with comfortable clamp tips in random colours. The spring alone measures 7.5x7.5mm, plus the clamping tips each measure 11 mm in length.

3 pcs, Practical bead scoops, made of aluminium, Handy for collecting beads and other small parts, lengths 6.5 - 8 and 8.5 cm, widths 4.5 - 5.5 and 7 cm, heights 1.5-2 cm.

The Ring Ratchet is a jeweller's tool for shaping silver parts and the like, this square variant is made of hardened steel, length 34.5 cm, width tip 6.5 mm shaft 18 mm. Please note this is not a measuring tool

1 set. wire jig kit, solid hole plate for wire wrapping, create your own designs for pendants, ear hooks, links etc. Measures 10.5x10.5x0.75 cm,, Made of white plastic with 20 pins, all pins 1.9 mm diameter and 16 mm long. Suitable for creative shaping of metal wire in thicknesses from 0.3 to 1 mm. Note. Supplied without metal wire.

Practical bead tray with circular compartments and dividers for easy measuring of bracelets in different sizes. Made of grey plastic with a velour surface. Suitable for use when making necklaces and bracelets. Length 35 cm, Width 26 cm, Height 1.6 cm

8 crochet hooks, set made of aluminium with plastic handle in various colours, length 14cm, includes 8 sizes 2.5 - 3 - 3.5 - 4 - 4.5 - 5 - 5.5 and 6 mm

DIY bag insert in light black felt, fitted with golden brass rings and rivets and with 5 internal pocket divisions, Measures when closed: length 16.5 cm, height 13 cm, thickness 5 cm, comes without shoulder strap.

DIY bag insert in black felt, fitted with golden brass rings and rivets and with 10 internal pocket divisions, Measures when closed: length 22 cm, height 18 cm, thickness 5 cm, comes without shoulder strap.

DIY bag insert in light grey felt, fitted with golden brass rings and rivets and with 5 internal pocket divisions, Measures when closed: length 16.5 cm, height 13 cm, thickness 5 cm, comes without shoulder strap.

DIY bag insert in light greyish felt, fitted with golden brass rings and rivets and with 10 internal pocket divisions, Measures when closed: length 22 cm, height 18 cm, thickness 5 cm, comes without shoulder strap.

DIY bag insert in dark brown felt, fitted with golden brass rings and rivets and with 10 internal pocket divisions, Measures when closed: length 22 cm, height 18 cm, thickness 5 cm, comes without shoulder strap.

DIY bag insert in dark brown felt, fitted with golden brass rings and rivets and with 5 internal pocket divisions, Measures when closed: length 16.5 cm, height 13 cm, thickness 5 cm, comes without shoulder strap.

2 pcs, Practical bead mats to keep your beads in order, length 30 cm, width 23 cm, thickness 4 mm, blue The beads are held fixed on the fine hairs, suitable for all types of beads.

1 adjustable white plastic knotting board with metal screws, suitable for regular knotting, braiding and similar, with two clamps for fastening at the ends, total length up to 35 cm, width 4.5 cm, height 8.5 cm. Allows you to easily put your work aside without loosening the threads. Tying instructions not included, but can be downloaded from the link below.  Rope and accessories are not included.

1 x steel diamond file for jewellery making, silver work and widening holes in stone, metal and freshwater pearls. Dimensions: 14 cm, Ø:3 mm, Ø at tip: 1 mm.

Practical bead tray with 18 compartments, made of plastic covered with velour-like surface, length 35 cm, width 20 cm, height 1.5 cm.

Emery stick with 600 grit on one side and 3000 grit on the other. Flexible foam material, Used for polishing scratched silver jewelry, removes minor scratches by rubbing the stick against the jewelry part until the desired result is achieved. Do not use on gold-plated surfaces as the color will be removed.

All-round scissors, short, black plastic handle, very suitable for hobby use, jewelry, paper cutting, working with fine small items, etc. length 115 mm, width 60 mm, thickness 7.5 mm

Wooden brass brush, typically used for silver soldering and casting to clean silver items after an acid bath. Scratch/brush the item under running water to get rid of the "boil skin", i.e. the surface that occurs after an acid bath. The brush measures 14.5 cm in full length, the bristles measure 16mm in length, brush head measures 4x1.5cm

1 white foam braiding board for making macramé and friendship bracelets. With handy cm markings, allows you to put your work aside without loosening the threads. Perfect for many different types of knotting and winding with slightly thinner threads. Length 26.5 cm, width 18 cm, thickness 1.8 cm. Supplied with 6 macramé T-needles with length 30 mm, width 12 mm.

10 pieces, Practical triangular bead bowl in plastic, Practical for collecting and pouring beads, length 7 cm, width 7 cm, height 1 cm. Note! delivered without beads.

2 pcs plastic needle threader for all seewing needles with eye, small and handy, length 5cm. Comes in random color.

Proxxon micro torch in metal and plastic for precision soldering of smaller silver parts, such as fine jewelry chains, silver wire up to 2mm, jumprings and more, uses ordinary butane / lighter gas, 50 ml (can be purchased in kiosks and supermarkets), flame up to 1200 degrees, burning time approx. 60min. May only be used in 5-minute intervals, however, a soldering rarely lasts that long. Total weight 200 grams. The mini torch is made of metal with electronic ignition and removable plastic base. When soldering larger silver parts, the Mini torch, Iroda PT-500 Pro-torch, is recommended instead.

Keep your jewelry tools in order with this zippered bag for pliers and the like. smart case covered with black fabric for jewelry tools, Measures in closed state: 23x15x3 cm, Attention! The bag comes without tools.

Keep your jewelry tools and other jewelry accessories organized with this black faux leather bag for pliers and the like. smart zippered case for jewelry tools, length 26 cm, width 16 cm, height 5 cm (closed state). The bag comes without tools.

10pcs. variations of files. Used for jewelry such as smoothing, shaping etc.

Bead spinner, device for quickly picking up beads on thread, 2 long curved sewing needles included, light wood. Rotating cup on base. Suitable for seed beads, makes it easy to thread beads onto string. Pour the beads into the bowl and use the long needle included to pick up the beads by rotation.

See the video guide here

See also example of DIY beaded flowers made with a bead spinner, Peekaboo Design.

The ring bolt is an indispensable goldsmith tool for forming finger rings, hoops and the like, it is made of wood, length 280 mm, diameter range from 12 mm to 26 mm. Note this is not a measuring tool, if you want to measure the size of finger rings you must use a ring size stick instead.

Stable and practical gripping stand for what ever you need fixed during the jewelery production. Particularly suitable for holding small parts and for soldering. With rotatable 2.5x magnifying glass. 26 cm long, 5 cm wide, 19 cm high. Diameter of magnifying glass 60 mm.

Fireproof pad for silver soldering, Length 110mm, width 95mm, thickness 25mm, fire resistant up to 1050 degrees Celcius

1 set, perforated metal plate for wire-wrap incl. 30 pcs of mixed metal pins of varying diameter. Make your own designs for pendants and links. Suitable for forming wire (gauge 0.3 - 1 mm). Easy instruction included. Comes without metal wire.

Hammer for jewelry making and crafting. With two interchangeable striking surfaces in plastic and rubber for a gentle and even blow. The hammer is made of stainless steel with rubber grip, Length 26.5 cm, Width 6.5 cm, Depth 2.5 cm, not suitable for regular nails. Use it for parts that must not be scratched, bent or otherwise damaged such as silver plates, glass plates, tent pegs, wooden parts, etc.

The ring bolt is an indispensable goldsmith tool for forming finger rings, hoops and the like, it is made of hardened stainless steel, length 260 mm, diameter range from 11 mm to 24 mm. Note this is not a measuring tool, if you want to measure the size of finger rings you must use a ring size stick instead.

Ring measuring mandrel is a handy tool which allows you to accurately size diameter and sizes on finger rings, length 260mm, made of plastic. Note, rings are not included.

1 piece. round file, 1 square, 1 rounded, 1 triangular and 1 flat file, suitable for various smaller works such as jewelery making, stainless steel with red shaft, length 14 cm.

1pc. Mask catcher needle of iron and plastic, length 16cm, thickness 6mm, size 0.5mm

JR-F6000, Strong viscous contact glue in plastic tube. Practical precision tip included. Can be used for pretty much anything. Metal, wood, glass, ceramics, stone, bamboo, fabric, leather, plastic types: PE, PP, PVC, ABX and nylon. Drying time approx. 10 minutes, thoroughly dryed after 24-48 hours.

Diesella caliper, handy tool for measuring diameter and hole sizes on various items, on beads for example. measures op to 100mm, delivered in a handy plastic holster.

Get started with silver soldering with this guide set. The set contains:

mini burner (SKU: 31162B),
soldering iron (SKU: 234415),
soldering iron set (SKU: 21251B-0.8mm),
Fluss H, Degussa (SKU: 31142-100g),
soldering steel,
soldering coil,
1 piece of soldering tweezers (part of SKU: 31124b)
flux brush.

Note! burner may only be used max. 5 min. at a time for safety reasons. Gas (lighter gas) for burner not included.

Pre-impregnated anti-discolouration paper is used to attach to silver parts (stored in bag) as well as gold plated silver parts to prevent tarnishing, each measuring 3x3 cm. 20 pcs.

1pc. sturdy braiding loom made of stainless steel, suitable for macramé knotting with paracord. Adjustable in length and with cords and two buckle clasps in different sizes. Length 39mm, Width approx. 10mm, heighth approx. 6mm. Makes it easy to put the work aside without having to undo the cord.

Go to our paracord section here

Classic lightweight metal and wood beading loom, suitable for bead weaving as well as macramé knotting. The two wooden rollers at the ends enable continuous winding of the woven piece, so you eg. can make extra long ribbons or bracelets. Loom total length 30 cm, width 9 cm, height 7.5 cm.

Attention, beads, thread and needle are not included, but can be purchased here:

For small beads for pearl weaving see category Seed beads & Delicas. Perfect for many different types of bead weaving.

We recommend Miyuki bead weawing thread with split needle for pearl weaving.

Practical bead tray with 12 compartments, made of plastic covered with velor-like surface, length 35 cm, width 20 cm, height 1.5 cm.

22 pcs. Crochet needles set of aluminum and iron, length 14cm, thickness 5 mm. Covers sizes 0.6 to 6.5 mm

Practical kit to take on the journey. The kit contains several different colors of thread, sewing needle, safety pin and two plastic buttons.

Classic fine pincet, with practical bead shovel at the end, pointed, length approx. 160mm, width of the shovel 24 mm

5 ml. bottle with brush. Milky white lacquer that dries to an invisible finish, water-based surface lacquer that enhances all surface coatings and protects against any allergens from the metal. The lacquer is brushed onto exposed areas of gold-plated or silver-plated jewellery parts. Lasts approximately 3-6 months with normal use, after which it is recommended to repeat the application. You can apply several coats afterwards for extra strength. The varnish also prevents oxidation and other discolouration of silver and other metals.
 

Teknos Clear Aqua Lacquer
is a high-quality, water-based product for protecting a wide range of surfaces. Apply the varnish with a brush on a cleaned surface, place the item on a hard surface, not paper, as it will stick. The varnish dries in 1-2 hours in a well-ventilated location.

Contents 5ml. causes eye irritation on contact (rinse with water), keep out of reach of children, non-flammable.

1 piece. 925 grade stamp in steel, stamp text length 0.75 mm, length 8 cm. The piston is easily hammered into the silver blank with a hammer for embossing with the 925 mark

1 pc. Wine stopper with pin (for beads with at least 3 mm hole), metalbead on top can be unscrewed. Steel tip with rubber rings, 120mm long, 20.5mm wide.

Soldering torch for silver soldering and the like up to 1300 degrees Celcius. Please notice that you additionally need a fireproof pad, a silver solder, flux and soldering tweezers. Uses regular butane / lighter gas, 50 ml (available in kiosks and supermarkets)

Fireproof pad for silver soldering, Length 330mm, width 245mm, thickness 25mm, fire resistant up to 1050 degrees Celcius

Easy knotting tool. Suitable for tying knots on a cord between beads for example on necklaces. Length is 14.5 cm. With black solid plastic handle
See the video tutorial to the beadknotter tool here

Sharp and pointy scissors for hobby use, excellent at cutting small accurate things. Size: 125x65x9mm.

Measuring tape in plastic. Very practical for making all kinds of beading work, total length 150cm, shows cm on one side and inch on the other side.

3 kinds of silver soldering wire with a diameter of 0.8mm. Silver solder has a lower melting point than normal silver wire. The V wire has got a silver content of 600 and is used to solder 800-914 silver. The M wire has a silver content of 675 is used to solder 925-silver. The O wire has a silver content of 750 and is also used to solder 925-silver.

Special tweezers for silver soldering etc. The set consits of 2 normal tweezers and 2 spring-loaded tweezers, which hold the item in place even if you let go. Length 19cm.

Fireproof pad and accessoiries for silver soldering. Please notice that you additionally need a soldering torch, a silver solder, flux and soldering tweezers.

100 g silver velding pasta. Kan be used with silver, gold and copper alloy. Work temperature 720 degree Celsius. Can be mixed with water.

Practical set for sawing/cutting silver and other metal jewelry parts. The saw comes with 24 blades and a board and cramp, so you can easily save in silver plate and wire. Make your own jumprings cheap. Wind silver thread (or similar) close on a knitting needle for a long spiral. Next cut the coil through on the one hand, starting from the top downwards. Pull the knitting needle out slowly as the rings loose.

Small polishing cloth from Haggertys for silver, gold and platinum jewelry, 8x8cm. The cloth contains dry silver cleaning medium and can be used directly on silver.

6pcs. empty plastic spools in assorted sizes, black and white, is used for spooling cord, thread and chain. approximately Length 9cm - 19cm, diameter 7cm - 12cm. Note: Some of the spools have been written on or in other ways marked or scratched.

10pcs. empty used plastic spools in assorted sizes, black and white, is used for spooling cord, thread and chain. Length 5cm - 8cm, diameter 6cm - 9cm. Note: Some of the spools have been written on or in other ways marked or scratched.

1 pc. Battery for watches and others, fits the Watches used for the watch-bracelets at Smyks. diameter 7mm, height 2.5mm. ATTENTION! The batteries can be of different brands.

Kumihimo disk in foam. Used for kumihimo-style braiding. 48 slots, diameter approx. 16cm, thickness 2cm. Instruction sheet supplied in English.

1pc. beading loom of wood, Length 35mm, Width 11mm, heighth 6.5mm, suitable for loomwork and macramé-style braiding. Makes it easy to put the work aside without loosen the strings. Our favorite tool at the macramé-style braiding/weaving courses. See our macramé-style braiding guide at the front page for instruction in how to use the loom for this.

See our blog post Wowen bead bracelets

Here you will find our selection of Rocailles and seed beads

Pointy scissors, iron, suitable for jewelry making and paper cutting, length approx. 16cm.

Ring mandrel is a handy tool which allows you to accurately size diameter and sizes on finger rings, length 255mm

Practical plastic bead tray that keeps your beads and jewellery projects organised. Measures 20x27x2 cm. This type of jewellery tray can be stacked with jewellery parts, so you can create many jewellery projects in a small space.

Handy bead tray in grey plastic with a soft velour surface, designed to keep your beads neatly in place while you work. Ideal for stringing necklaces and bracelets. Features both centimetre and inch markings for easy measuring. Measures 23.5 × 32.5 cm.

Quality polishing cloth from Hagerty for silver, 25x30cm. The cloth contains dry silver cleaning medium and can be used directly on silver.

Beeswax in a clear container. Prevents split thread ends and makes the thread easy to work with.

4 assorted round files suitable for enlarging holes in various beads and metal parts, coated with industrial diamond, purple plastic and steel.

Classic fine pincet, pointed, length approx. 13.5cm, widthe 10 mm. For example, it is ideal for tying knots between beads on necklaces.

Professional bead board in wood. Very practical for making all kinds of beading work, total length 57cm, ruler length 50cm.

Super strong adhesive with handy tip and pump function. Can be used for almost everything except certain PVC types such as Hama beads and Lego. The gel consistency makes it easy to glue on horizontal surfaces without dripping. Click to see further specifications.