Start by selecting a bead for the 1st flower. Thread the flower and delica beads onto a headpin until you have the desired length. Finish with a loop with windings. Create 2 more flowers in the same way.

The 3 flowers are gathered in a jumpring, which is then placed on the earwire.

Earrings with Roses and Leaves

For this earstud, we used the following jewellery parts:

Earstud with ball and transvers eyelet, gold-plated sterling silver

2 open jumprings, 4mm, gold-plated sterling silver

Acrylic leaf, green, 9.7x5.5mm

Rose, pendant with gold-plated eyelet

The parts are assembled with jumprings and attached to the eyelet in the earstud.

For the earthread, we used the following jewellery parts:

Earthread, cable chain with eyelet, 10cm, gold-plated sterling silver

1 headpin with 1.5mm ball, gold-plated sterling silver

Rose, pendant with gold-plated eyelet

Acrylic leaf, light green, 9.7x5.5mm

Miyuki seed beads, size #15, light green

Cut the eyelet of the rose pendant off to make it function as a bead. String all the pieces for the flower onto a headpin... and finish with a loop with windings. Open the eyelet of the earthread carefully ... insert the loop of the flower ... and close the eyelet of the earthread again.

Hoop with Bouquet

For this earring, we used the following jewellery parts:

Hinged hoop with eyelet, gold-plated sterling silver

Small flower glass bead, white, 5mm

Acrylic flower, pink, 9x5mm

Celestial crystal drop, red, 10x4mm

Glass bead, millefiori, red, 8x3mm

Delica beads, size #15, dark green matte

2 headpins with 1.5mm ball, gold-plated sterling silver

1 headpin with 1.5mm plate, gold-plated sterling silver

1 open jumpring, 4mm, gold-plated sterling silver

Make 3 flowers by running a headpin through the beads you have chosen. Connect all the flowers to the eyelet in the hoop with the help of a jumpring.

Earstud with Glass Bead Bouquet

For this earring, we used the following jewellery parts:

Earstuds, reeded arch with 3 eyelets, gold-plated sterling silver

3 headpins with 1.5mm plate, gold-plated sterling silver

Glass bead, millefiori flower, blue, 4.5x2.5mm

Glass bead, millefiori, spherical, 4mm

Glass bead, millefiori, round, flat, 8x3mm

Delica beads, size #15 dark green matte - light green - peach

3 open jumprings, 3x0.5mm, gold-plated sterling silver

Make 3 flowers by running a headpin through the beads you have chosen. Each of the flowers is connected to one eyelet in the earring with a jumpring.

Earrings with Flowers and Hummingbird

Bouquet of Roses

For this earstud, we used the following jewellery parts:

Earstud with ball and transvers eyelet, gold-plated sterling silver

3 headpins with 1.5mm ball, gold-plated sterling silver

3 Roses, pendants with gold-plated eyelet

1 open jumpring, 4mm, gold-plated sterling silver

Delica beads, size #15, dark green matte

Cut the eyelet of the rose pendant off to make it function as a bead. Thread all the parts for the flower onto a headpin... and finish with a loop with windings.

Make 3 flowers in total and gather the 3 flowers in a jumpring. Open the eyelet in the earstud and insert the rose bouquet.

Earthread with Daisy and Hummingbird

For this earring, we used the following jewellery parts:

Earthread, cable chain with eyelet, 10cm, gold-plated sterling silver

1 headpin with 1.5mm plate, gold-plated sterling silver

Glass bead, millefiori daisy flower, 7-8x3mm

Delica beads, size #15, dark green matte

2 open jumprings, 4mm, gold-plated sterling silver

Hummingbird pendant, gold-plated brass

The flower and the hummingbird are fastened to the eyelet of the earthread with jumprings.

Hoop with Flowers and Butterfly

For this earring, we used the following jewellery parts:

Hinged hoop with eyelet, gold-plated sterling silver

2 headpins with 1.5mm ball, gold-plated sterling silver

3 open jumprings, 4mm, gold-plated sterling silver

Delica beads, size #15, light green

Acrylic flower, red 9x5mm

Flower bud, turquoise, 8.5x7mm

Butterfly charm, 8x9mm, gold-plated sterling silver

String the flower and the Delica beads onto a headpin ... and form a loop with windings. Make a second flower. Use a jumpring each to fasten the two flowers and the butterfly charm to the hoop.