Soldering set with fireproof pad, spiral, coal, net and needle, 1pc.

Hammer for jewelry making and crafting. With two interchangeable striking surfaces in plastic and rubber for a gentle and even blow. The hammer is made of stainless steel with rubber grip, Length 26.5 cm, Width 6.5 cm, Depth 2.5 cm, not suitable for regular nails. Use it for parts that must not be scratched, bent or otherwise damaged such as silver plates, glass plates, tent pegs, wooden parts, etc.

Set of 5 jewellery hammers for jewellery making and silver work. With varying striking surfaces. The hammers are made of stainless steel with a wooden handle, length 22 cm, depth 6.5 cm, width without striking surfaces 13 mm. Suitable for processing jewellery parts such as silver plate, wire, etc. Practical wooden tool holder included.

Hammer for jewellery making and silver work. With 9 different interchangeable stainless steel striking surfaces / trajectories as shown. The hammer is made of stainless steel with a wooden handle, length 25 cm, depth 7 cm, width without striking surfaces 25 mm. Suitable for processing jewellery parts such as silver plate, wire, etc. The striking surfaces can be unscrewed and replaced as needed.

Hammer for jewellery making and silver work. With 11 different interchangeable stainless steel striking surfaces. The hammer is made of stainless steel with a black wooden handle, length 23 cm, depth 7 cm, width without striking surfaces 14 mm. Suitable for processing jewellery parts such as silver plate, wire, etc. Umbracon key included

Get started with silver soldering with this guide set. The set contains:

mini burner (SKU: 31162B),
soldering iron (SKU: 234415),
soldering iron set (SKU: 21251B-0.8mm),
Fluss H, Degussa (SKU: 31142-100g),
soldering steel,
soldering coil,
1 piece of soldering tweezers (part of SKU: 31124b)
flux brush.

Note! burner may only be used max. 5 min. at a time for safety reasons. Gas (lighter gas) for burner not included.

Fireproof pad for silver soldering, Length 330mm, width 245mm, thickness 25mm, fire resistant up to 1050 degrees Celcius

Fireproof pad for silver soldering, Length 110mm, width 95mm, thickness 25mm, fire resistant up to 1050 degrees Celcius

3 kinds of silver soldering wire with a diameter of 0.8mm. Silver solder has a lower melting point than normal silver wire. The V wire has got a silver content of 600 and is used to solder 800-914 silver. The M wire has a silver content of 675 is used to solder 925-silver. The O wire has a silver content of 750 and is also used to solder 925-silver.

Special tweezers for silver soldering etc. The set consits of 2 normal tweezers and 2 spring-loaded tweezers, which hold the item in place even if you let go. Length 19cm.