Glue-in ends & cord tips, silver

Cord-ends and crimp-beads for jewelry cords

Here you find a comprehensive selection of silver cord ends and chain closings for necklaces as well as bracelets including crimp covers, crimp beads, clamp-on beads, glue-in ends, clasp sets and more.

Crimp covers and clamp-on beads are usually used for combining several strands of pearl chain or for closing it. They are typically the link between the cord and the clasp.

A common feature of all the chain closings and cord ends in this category is that you either glue or clamp them to the cord.
The jewelry parts on this page are made of different kinds of material which of cause are all  nickel-free.
For instructions on how to attach cord ends etc. to necklaces and bracelets please go to our blog section where you will find a number of articles on this topic.

Crimp cord end, bead tip with 2 eyes, silver, 3.5x7mm., 4pcs.

4407ss-3.5mm


4 pcs, sterling silver, knot bead ending with eye, ball diameter 3.5 mm, length folded 7 mm, width 3.5 mm, hole diameter 1 mm, eye diameter 1.2 mm. Makes an effective and simple ending for bead chains on wire. No glue or tools are needed to install this termination. Thread the termination onto the wire, tie a knot or two and clamp the termination around the knot (requires pointed or wide-nose pliers)

 

EUR 4,38

Show product

bead with jumpring, silver-plated brass, 4mm, 4pcs.

4511BCfs-4mm


4 pcs., round locking beads or beads for attaching pendants on a necklace or bracelet. with 1 mm eye, silver plated brass, diameter 4 mm. Hole for 0,9 mm cord, e.g. polyester. Can be used as adjustable locking bead. Note when used as a sliding locking bead: does not contain rubber membrane, so strength of lock depends on cords used being tight enough by themselves.

EUR 2,83

Show product

Crimp end, large eye, closed, sterling silver, 4mm., 2pcs.

4410SS-4mm


2pcs., sterling silver, open, bead diameter 4mm., total length 8mm., hole size 2,5mm., inner eye diameter 3,5mm. Use especially for a classic bead necklace on silk thread, which ends with 2-3 knots in a row close together. The knots are glued into the hole on the crimp end with strong glue.

EUR 3,48

Show product

Crimp end, set, large and small, sterling silver, 4mm., 2pcs.

4411-4mm


2pcs., (1 set) crimp ends for fitting silk thread necklace, sterling silver. Cord end A: length 8,2mm., bead diameter 4mm., hole size 2mm., eye diameter 3mm. Cord end B: length 8,2mm., bead diameter 4mm., hole size 2mm., eye diameter 1,5mm. Make 2-3 knots close together at the end of the necklace which are pushed into the bead with a dab of glue, so that the knots can not be pulled out once the glue has hardened. Place the clasp into the open ring and close in the large eye. See our guide for be

EUR 3,48

Show product

Crimp end, set, large and small, silver, 5mm., 2pcs.

4411-5mm


2pcs., (1 set) crimp ends for fitting silk thread necklace, sterling silver. Cord end A: length 8,2mm., bead diameter 5mm., hole size 3mm., eye diameter 1,5mm. Cord end B: length 9,2mm., bead diameter 5mm., hole size 3mm., eye diameter 3mm. Make 2-3 knots close together at the end of the necklace which are pushed into the bead with a dab of glue, so that the knots can not be pulled out once the glue has hardened. Place the clasp into the open ring and close in the large eye. See our guide for be

EUR 3,74

Show product

Crimp end, silver, with large closed eye, silver, 3mm., 2pcs.

4412-3mm


2pcs., sterling silver, crimp end with large eye, length 7,5mm., hole size 1,5mm., inner eye diameter 3mm. Use especially for a classic bead necklace on silk thread, which ends with 2-3 knots in a row close together. The knots are glued into the hole on the crimp end with strong glue.

EUR 3,35

Show product

Crimp end, set, silver, large and small eye, 3mm. ball

4411-3mm


2pcs., (1 set) crimp end for fitting silk thread necklace, 1 closed + 1 open, bead diameter 3mm., sterling silver. Cord end A: length 7,5mm., hole size 1,5mm., eye diameter 3mm. Cord end B: length 6mm., hole size 1,5mm., eye diameter 2mm., Make 2-3 knots close together at the end of the necklace which are pushed into the bead with a dab of glue, so that the knots can not be pulled out once the glue has hardened. Place the clasp into the open ring and close in the large eye.

EUR 2,19

Show product